Tear-Aid Type A

TEAR-AID is a unique transparent repair tool that allows you to easily close cracks and holes in practically all materials. It is unprecedentedly strong and elastic. TEAR-AID is not a temporary solution. TEAR-AID has various properties that make it the ideal repair tool: it is extremely strong, watertight, airtight, very elastic, it does not discolor, it does not dry out and is permanent.

TEAR-AID repairs, among other things: tent cloth, rubber (inflatable) boats, inflatables, sun and rain screens, jackets and bags. But also products from aluminum, stainless steel, polyester and more.

• When applying: 90%
• direct adhesion After 1 hour: 100% adhesion.

Type A is applicable on most substrates, except for PVC / vinyl, for this special Type B. First check here if you need type A or B for the material to be repaired.

Make sure the surface is completely dry. Keep Tear-Aid out of the reach of children

Package Contents:

• 1 x Tear-Aid repair patch 30 x 7.6 cm
• 1 x Reinforcement thread
• 4 x Alcohol wipes
• 1 x Dutch user manual

For cracks or holes in the middle of the material:

1. Grease the material around the damage with the supplied alcohol wipe. Make sure the surface is completely dry.

2. Cut the Tear-Aid patch to the correct size. For an optimal connection, the patch requires at least 2.5 centimeters of adhesion on all sides of the crack.

3. Cut the corners preferably around.

4. Carefully remove a piece of approx. 1 centimeter from the protective paper of the patch. To do this, stretch the patch slightly so that the paper tears.

5. Place the damaged material together.

6. Apply the released piece of Tear-Aid to the crack. Remove the rest of the paper and at the same time apply the rest of the patch to the material.

7. Press it firmly once again from the center.

For cracks or holes on the edge of the material:

1. Grease the material around the damage with the supplied alcohol wipe. Make sure the surface is completely dry.

2. Cut the Tear-Aid patch to the correct size. For an optimal connection, the patch requires at least 2.5 centimeters of adhesion on all sides of the crack.

3. Apply the patch to the outside of the material and turn the fabric around.

4. Lay the supplied nylon thread along the edge for reinforcement.

5. Fold the protruding part of the patch around the edge.

6. Apply a second patch on the other side of the material.

7. Press the patches firmly and cut the protruding part of the nylon thread.